Silicone water repellents

Water Repellent and Waterproofing admixture for masonry surfaces (SS WRP 10) is an aqueous solution of specially developed nano polymer, water dilutable used for the impregnation of mineral construction materials to make them water-repellent without significantly reducing water vapor permeability. SS WRP 10 provides its water repellent properties by deeply penetrating into pores and capillaries of cement


Parameter Value
Appearance Clear to slightly yellow
Specific Gravity 1.25-1.4
Flash Point, open cup >93
pH 13
Diluent Water


Typical Values – Should not be considered as specifications.

FEATURES

  • Penetrating and breathable
  • Imparts water repellency to a wide variety of substances
  • Reduces water absorption into the substrate, thus reducing spilling due to freeze-thaw and efflorescence,thereby Increasing the life of the substrate
  • Colorless and non-yellowing protection preserves the naturalappearance of the substrate
  • Nonflammable

Admixture in Concrete provides following characteristics:

  • Block all capillaries generated during curing thereby eliminating water absorption, penetration and dampness.
  • Increases Bond, compressive and flexural strength.
  • Increases resistance to scaling on concrete
  • Entrained significant amount of air.
  • Makes all Cement mixture water repellent and waterproof


Add Mixture:0.1% to 0.3% by weight of Cement. Use 100 to 250 gms per cement bag.DILUTION:Concrete: 1:3

USABLE LIFE & STORAGE

When stored bellow 45°C in the original unopened containers, SS WRP 10 has a usable life of 2 yrs from the date of manufacturing

HANDLING PRECAUTIONS

Product safety information required for safe use is not included. Before handling, read Material Safety Data Sheets (MSDS) and container labels for safe use, physical and health hazard information.

Communication Address:


  • Contact Person:Mr. Omkar Waikar.


  • Address: A 704, Nancy Lake Hom, Satara Road,
    Opp Bharti Vidyapeeth, Katraj,Pune - 411046.Maharashtra, India.


  • Phone: +91 9822281671.


  • Mobile: +91 9850146661


  • Email: omkar@supremesilicones.com


Sales Office:


  • Contact Person: Mr. Rohit Y. Mandhare


  • Address:Arihant Residency, 101- First Floor,
    Sinhgad College Road, Near Bank Of Maharashtra,
    Katraj Bypass, Ambegaon BK, Pune - 411046,
    Maharashtra, India.

  • Phone:(+91)7028899526


  • Mobile: 9850146661


  • Email:rohit@supremesilicones.com.


Factory Address:


  • Contact Person: Mr. Abhijit Suryawanshi,Mr.Abhijeet Goswami


  • Address: H-55, MIDC – WALUJ,
    Aurangabad-411046, Maharashtra, India.


  • Phone: +91-240-2554194


  • Mobile: +91 9823359104


  • Email: suryawanshi@supremesilicones.com